Carriage Motor for Beogram 4000, 4002, and 4004

• Drop in replacement for original carriage motors.
• Custom manufactured coreless DC motor design for low vibrations and noise.
• Comes with a new pulley installed.
• Vibration damping rubber rings included.
• Motor emits less noise and vibration compared to most original motors.
• Same torque and speed as original motors at reduced current due to modern design. This reduces the heat load in the H-bridge transistors.
• Replaces Faulhaber 330/209-82, Maxon 2023.913 and others.
• B&O part numbers 8400080 and 8400062.
  
• Wobbly plastic pulley on the carriage spindle?: Get a Beolover precision machined aluminum replacement (available for Beogram 4002/4004 and 4000)!
• See this post for more information.
• NOTE: It appears that at least some original Beogram 4000 motors have a reverse run direction compared to those installed in Beogram 4002/4004 if the same polarity is applied to red and black leads. This means you may need to reverse red/black when you install one of these new motors in a Beogram 4000. I am not ruling out that there may also be some 4002/4004 models where this may also be the case. My advice is to hook up old and new motors to a bench supply and see if they go in the same direction. If not, simply reverse red and black wires on the solder terminals. The joys of vintage audio!...;-).

Follow us on the Beolover Blog for updates and info about our B&O restoration efforts.